Mail::SpamAssassin::Conf - SpamAssassin configuration file
# a comment
rewrite_header Subject *****SPAM*****
full PARA_A_2_C_OF_1618 /Paragraph .a.{0,10}2.{0,10}C. of S. 1618/i
describe PARA_A_2_C_OF_1618 Claims compliance with senate bill 1618
header FROM_HAS_MIXED_NUMS From =~ /\d+[a-z]+\d+\S*@/i
describe FROM_HAS_MIXED_NUMS From: contains numbers mixed in with letters
score A_HREF_TO_REMOVE 2.0
lang es describe FROM_FORGED_HOTMAIL Forzado From: simula ser de hotmail.com
lang pt_BR report O programa detetor de Spam ZOE [...]SpamAssassin is configured using traditional UNIX-style configuration files, loaded from the /usr/share/spamassassin and /etc/mail/spamassassin directories.
The following web page lists the most important configuration settings used to configure SpamAssassin; novices are encouraged to read it first:
http://wiki.apache.org/spamassassin/ImportantInitialConfigItemsThe # character starts a comment, which continues until end of line. NOTE: if the # character is to be used as part of a rule or configuration option, it must be escaped with a backslash. i.e.: \#
Whitespace in the files is not significant, but please note that starting a line with whitespace is deprecated, as we reserve its use for multi-line rule definitions, at some point in the future.
Currently, each rule or configuration setting must fit on one-line; multi-line settings are not supported yet.
File and directory paths can use ~ to refer to the user's home directory, but no other shell-style path extensions such as globing or ~user/ are supported.
Where appropriate below, default values are listed in parentheses.
Test names ("SYMBOLIC_TEST_NAME") can only contain alphanumerics/underscores, can not start with digit, and must be less than 128 characters.
The following options can be used in both site-wide (local.cf) and user-specific (user_prefs) configuration files to customize how SpamAssassin handles incoming email messages.
Set the score required before a mail is considered spam. n.nn can be an integer or a real number. 5.0 is the default setting, and is quite aggressive; it would be suitable for a single-user setup, but if you're an ISP installing SpamAssassin, you should probably set the default to be more conservative, like 8.0 or 10.0. It is not recommended to automatically delete or discard messages marked as spam, as your users will complain, but if you choose to do so, only delete messages with an exceptionally high score such as 15.0 or higher. This option was previously known as required_hits and that name is still accepted, but is deprecated.
Assign scores (the number of points for a hit) to a given test. Scores can be positive or negative real numbers or integers. SYMBOLIC_TEST_NAME is the symbolic name used by SpamAssassin for that test; for example, 'FROM_ENDS_IN_NUMS'.
If only one valid score is listed, then that score is always used for a test.
If four valid scores are listed, then the score that is used depends on how SpamAssassin is being used. The first score is used when both Bayes and network tests are disabled (score set 0). The second score is used when Bayes is disabled, but network tests are enabled (score set 1). The third score is used when Bayes is enabled and network tests are disabled (score set 2). The fourth score is used when Bayes is enabled and network tests are enabled (score set 3).
Setting a rule's score to 0 will disable that rule from running.
If any of the score values are surrounded by parenthesis '()', then all of the scores in the line are considered to be relative to the already set score. ie: '(3)' means increase the score for this rule by 3 points in all score sets. '(3) (0) (3) (0)' means increase the score for this rule by 3 in score sets 0 and 2 only.
If no score is given for a test by the end of the configuration, a default score is assigned: a score of 1.0 is used for all tests, except those whose names begin with 'T_' (this is used to indicate a rule in testing) which receive 0.01.
Note that test names which begin with '__' are indirect rules used to compose meta-match rules and can also act as prerequisites to other rules. They are not scored or listed in the 'tests hit' reports, but assigning a score of 0 to an indirect rule will disable it from running.
Used to whitelist sender addresses which send mail that is often tagged (incorrectly) as spam.
Use of this setting is not recommended, since it blindly trusts the message, which is routinely and easily forged by spammers and phish senders. The recommended solution is to instead use whitelist_auth or other authenticated whitelisting methods, or whitelist_from_rcvd.
Whitelist and blacklist addresses are now file-glob-style patterns, so friend@somewhere.com, *@isp.com, or *.domain.net will all work. Specifically, * and ? are allowed, but all other metacharacters are not. Regular expressions are not used for security reasons. Matching is case-insensitive.
Multiple addresses per line, separated by spaces, is OK. Multiple whitelist_from lines are also OK.
The headers checked for whitelist addresses are as follows: if Resent-From is set, use that; otherwise check all addresses taken from the following set of headers:
Envelope-Sender
Resent-Sender
X-Envelope-From
FromIn addition, the "envelope sender" data, taken from the SMTP envelope data where this is available, is looked up. See envelope_sender_header.
e.g.
whitelist_from joe@example.com fred@example.com
whitelist_from *@example.comUsed to remove a default whitelist_from entry, so for example a distribution whitelist_from can be overridden in a local.cf file, or an individual user can override a whitelist_from entry in their own user_prefs file. The specified email address has to match exactly (although case-insensitively) the address previously used in a whitelist_from line, which implies that a wildcard only matches literally the same wildcard (not 'any' address).
e.g.
unwhitelist_from joe@example.com fred@example.com
unwhitelist_from *@example.comWorks similarly to whitelist_from, except that in addition to matching a sender address, a relay's rDNS name or its IP address must match too for the whitelisting rule to fire. The first parameter is a sender's e-mail address to whitelist, and the second is a string to match the relay's rDNS, or its IP address. Matching is case-insensitive.
This second parameter is matched against a TCP-info information field as provided in a FROM clause of a trace information (i.e. in a Received header field, see RFC 5321). Only the Received header fields inserted by trusted hosts are considered. This parameter can either be a full hostname, or a domain component of that hostname, or an IP address (optionally followed by a slash and a prefix length) in square brackets. The address prefix (mask) length with a slash may stand within brackets along with an address, or may follow the bracketed address. Reverse DNS lookup is done by an MTA, not by SpamAssassin.
For backward compatibility as an alternative to a CIDR notation, an IPv4 address in brackets may be truncated on classful boundaries to cover whole subnets, e.g. [10.1.2.3], [10.1.2], [10.1], [10].
In other words, if the host that connected to your MX had an IP address 192.0.2.123 that mapped to 'sendinghost.example.org', you should specify sendinghost.example.org, or example.org, or [192.0.2.123], or [192.0.2.0/24], or [192.0.2] here.
Note that this requires that internal_networks be correct. For simple cases, it will be, but for a complex network you may get better results by setting that parameter.
It also requires that your mail exchangers be configured to perform DNS reverse lookups on the connecting host's IP address, and to record the result in the generated Received header field according to RFC 5321.
e.g.
whitelist_from_rcvd joe@example.com example.com
whitelist_from_rcvd *@* mail.example.org
whitelist_from_rcvd *@axkit.org [192.0.2.123]
whitelist_from_rcvd *@axkit.org [192.0.2.0/24]
whitelist_from_rcvd *@axkit.org [192.0.2.0]/24
whitelist_from_rcvd *@axkit.org [2001:db8:1234::/48]
whitelist_from_rcvd *@axkit.org [2001:db8:1234::]/48Same as whitelist_from_rcvd, but used for the default whitelist entries in the SpamAssassin distribution. The whitelist score is lower, because these are often targets for spammer spoofing.
Specify addresses which are in whitelist_from_rcvd that sometimes send through a mail relay other than the listed ones. By default mail with a From address that is in whitelist_from_rcvd that does not match the relay will trigger a forgery rule. Including the address in whitelist_allows_relay prevents that.
Whitelist and blacklist addresses are now file-glob-style patterns, so friend@somewhere.com, *@isp.com, or *.domain.net will all work. Specifically, * and ? are allowed, but all other metacharacters are not. Regular expressions are not used for security reasons. Matching is case-insensitive.
Multiple addresses per line, separated by spaces, is OK. Multiple whitelist_allows_relays lines are also OK.
The specified email address does not have to match exactly the address previously used in a whitelist_from_rcvd line as it is compared to the address in the header.
e.g.
whitelist_allows_relays joe@example.com fred@example.com
whitelist_allows_relays *@example.comUsed to remove a default whitelist_from_rcvd or def_whitelist_from_rcvd entry, so for example a distribution whitelist_from_rcvd can be overridden in a local.cf file, or an individual user can override a whitelist_from_rcvd entry in their own user_prefs file.
The specified email address has to match exactly the address previously used in a whitelist_from_rcvd line.
e.g.
unwhitelist_from_rcvd joe@example.com fred@example.com
unwhitelist_from_rcvd *@axkit.orgUsed to specify addresses which send mail that is often tagged (incorrectly) as non-spam, but which the user doesn't want. Same format as whitelist_from.
Used to remove a default blacklist_from entry, so for example a distribution blacklist_from can be overridden in a local.cf file, or an individual user can override a blacklist_from entry in their own user_prefs file. The specified email address has to match exactly the address previously used in a blacklist_from line.
e.g.
unblacklist_from joe@example.com fred@example.com
unblacklist_from *@spammer.comIf the given address appears as a recipient in the message headers (Resent-To, To, Cc, obvious envelope recipient, etc.) the mail will be whitelisted. Useful if you're deploying SpamAssassin system-wide, and don't want some users to have their mail filtered. Same format as whitelist_from.
There are three levels of To-whitelisting, whitelist_to, more_spam_to and all_spam_to. Users in the first level may still get some spammish mails blocked, but users in all_spam_to should never get mail blocked.
The headers checked for whitelist addresses are as follows: if Resent-To or Resent-Cc are set, use those; otherwise check all addresses taken from the following set of headers:
To
Cc
Apparently-To
Delivered-To
Envelope-Recipients
Apparently-Resent-To
X-Envelope-To
Envelope-To
X-Delivered-To
X-Original-To
X-Rcpt-To
X-Real-ToSee above.
See above.
If the given address appears as a recipient in the message headers (Resent-To, To, Cc, obvious envelope recipient, etc.) the mail will be blacklisted. Same format as blacklist_from.
Used to specify addresses which send mail that is often tagged (incorrectly) as spam. This is different from whitelist_from and whitelist_from_rcvd in that it first verifies that the message was sent by an authorized sender for the address, before whitelisting.
Authorization is performed using one of the installed sender-authorization schemes: SPF (using Mail::SpamAssassin::Plugin::SPF), or DKIM (using Mail::SpamAssassin::Plugin::DKIM). Note that those plugins must be active, and working, for this to operate.
Using whitelist_auth is roughly equivalent to specifying duplicate whitelist_from_spf, whitelist_from_dk, and whitelist_from_dkim lines for each of the addresses specified.
e.g.
whitelist_auth joe@example.com fred@example.com
whitelist_auth *@example.comSame as whitelist_auth, but used for the default whitelist entries in the SpamAssassin distribution. The whitelist score is lower, because these are often targets for spammer spoofing.
Used to remove a whitelist_auth or def_whitelist_auth entry. The specified email address has to match exactly the address previously used.
e.g.
unwhitelist_auth joe@example.com fred@example.com
unwhitelist_auth *@example.comAdds one or more host names or domain names to a named list of URI domains. The named list can then be consulted through a check_uri_host_listed() eval rule implemented by the WLBLEval plugin, which takes the list name as an argument. Parenthesis around a list name are literal - a required syntax.
Host names may optionally be prefixed by an exclamation mark '!', which produces false as a result if this entry matches. This makes it easier to exclude some subdomains when their superdomain is listed, for example:
enlist_uri_host (MYLIST) !sub1.example.com !sub2.example.com example.comNo wildcards are supported, but subdomains do match implicitly. Lists are independent. Search for each named list starts by looking up the full hostname first, then leading fields are progressively stripped off (e.g.: sub.example.com, example.com, com) until a match is found or we run out of fields. The first matching entry (the most specific) determines if a lookup yielded a true (no '!' prefix) or a false (with a '!' prefix) result.
If an URL found in a message contains an IP address in place of a host name, the given list must specify the exact same IP address (instead of a host name) in order to match.
Use the delist_uri_host directive to neutralize previous enlist_uri_host settings.
Enlisting to lists named 'BLACK' and 'WHITE' have their shorthand directives blacklist_uri_host and whitelist_uri_host and corresponding default rules, but the names 'BLACK' and 'WHITE' are otherwise not special or reserved.
Removes one or more specified host names from a named list of URI domains. Removing an unlisted name is ignored (is not an error). Listname is optional, if specified then just the named list is affected, otherwise hosts are removed from all URI host lists created so far. Parenthesis around a list name are a required syntax.
Note that directives in configuration files are processed in sequence, the delist_uri_host only applies to previously listed entries and has no effect on enlisted entries in yet-to-be-processed directives.
For convenience (similarity to the enlist_uri_host directive) hostnames may be prefixed by a an exclamation mark, which is stripped off from each name and has no meaning here.
Adds one or more addresses to a named list of addresses. The named list can then be consulted through a check_from_in_list() or a check_to_in_list() eval rule implemented by the WLBLEval plugin, which takes the list name as an argument. Parenthesis around a list name are literal - a required syntax.
Listed addresses are file-glob-style patterns, so friend@somewhere.com, *@isp.com, or *.domain.net will all work. Specifically, * and ? are allowed, but all other metacharacters are not. Regular expressions are not used for security reasons. Matching is case-insensitive.
Multiple addresses per line, separated by spaces, is OK. Multiple enlist_addrlist lines are also OK.
Enlisting an address to the list named blacklist_to is synonymous to using the directive blacklist_to
Enlisting an address to the list named blacklist_from is synonymous to using the directive blacklist_from
Enlisting an address to the list named whitelist_to is synonymous to using the directive whitelist_to
Enlisting an address to the list named whitelist_from is synonymous to using the directive whitelist_from
e.g.
enlist_addrlist (PAYPAL_ADDRESS) service@paypal.com
enlist_addrlist (PAYPAL_ADDRESS) *@paypal.co.ukIs a shorthand for a directive: enlist_uri_host (BLACK) host ...
Please see directives enlist_uri_host and delist_uri_host for details.
Is a shorthand for a directive: enlist_uri_host (BLACK) host ...
Please see directives enlist_uri_host and delist_uri_host for details.
By default, suspected spam messages will not have the Subject, From or To lines tagged to indicate spam. By setting this option, the header will be tagged with STRING to indicate that a message is spam. For the From or To headers, this will take the form of an RFC 2822 comment following the address in parentheses. For the Subject header, this will be prepended to the original subject. Note that you should only use the _REQD_ and _SCORE_ tags when rewriting the Subject header if report_safe is 0. Otherwise, you may not be able to remove the SpamAssassin markup via the normal methods. More information about tags is explained below in the TEMPLATE TAGS section.
Parentheses are not permitted in STRING if rewriting the From or To headers. (They will be converted to square brackets.)
If rewrite_header subject is used, but the message being rewritten does not already contain a Subject header, one will be created.
A null value for STRING will remove any existing rewrite for the specified header.
Add a prefix in emails Subject if a rule is matched. To enable this option "rewrite_header Subject" config option must be enabled as well.
The check if can(Mail::SpamAssassin::Conf::feature_subjprefix) should be used to silence warnings in previous SpamAssassin versions.
To be able to use this feature a add_header all Subjprefix _SUBJPREFIX_ configuration line could be needed when the glue between the MTA and SpamAssassin rewrites the email content.
Here is an example on how to use this feature:
rewrite_header Subject *****SPAM*****
add_header all Subjprefix _SUBJPREFIX_
body OLEMACRO_MALICE eval:check_olemacro_malice()
describe OLEMACRO_MALICE Dangerous Office Macro
score OLEMACRO_MALICE 5.0
if can(Mail::SpamAssassin::Conf::feature_subjprefix)
subjprefix OLEMACRO_MALICE [VIRUS]
endifCustomized headers can be added to the specified type of messages (spam, ham, or "all" to add to either). All headers begin with X-Spam- (so a header_name Foo will generate a header called X-Spam-Foo). header_name is restricted to the character set [A-Za-z0-9_-].
The order of add_header configuration options is preserved, inserted headers will follow this order of declarations. When combining add_header with clear_headers and remove_header, keep in mind that add_header appends a new header to the current list, after first removing any existing header fields of the same name. Note also that add_header, clear_headers and remove_header may appear in multiple .cf files, which are interpreted in alphabetic order.
string can contain tags as explained below in the TEMPLATE TAGS section. You can also use \n and \t in the header to add newlines and tabulators as desired. A backslash has to be written as \\, any other escaped chars will be silently removed.
All headers will be folded if fold_headers is set to 1. Note: Manually adding newlines via \n disables any further automatic wrapping (ie: long header lines are possible). The lines will still be properly folded (marked as continuing) though.
You can customize existing headers with add_header (only the specified subset of messages will be changed).
See also clear_headers and remove_header for removing headers.
Here are some examples (these are the defaults, note that Checker-Version can not be changed or removed):
add_header spam Flag _YESNOCAPS_
add_header all Status _YESNO_, score=_SCORE_ required=_REQD_ tests=_TESTS_ autolearn=_AUTOLEARN_ version=_VERSION_
add_header all Level _STARS(*)_
add_header all Checker-Version SpamAssassin _VERSION_ (_SUBVERSION_) on _HOSTNAME_Headers can be removed from the specified type of messages (spam, ham, or "all" to remove from either). All headers begin with X-Spam- (so header_name will be appended to X-Spam-).
See also clear_headers for removing all the headers at once.
Note that X-Spam-Checker-Version is not removable because the version information is needed by mail administrators and developers to debug problems. Without at least one header, it might not even be possible to determine that SpamAssassin is running.
Clear the list of headers to be added to messages. You may use this before any add_header options to prevent the default headers from being added to the message.
add_header, clear_headers and remove_header may appear in multiple .cf files, which are interpreted in alphabetic order, so clear_headers in a later file will remove all added headers from previously interpreted configuration files, which may or may not be desired.
Note that X-Spam-Checker-Version is not removable because the version information is needed by mail administrators and developers to debug problems. Without at least one header, it might not even be possible to determine that SpamAssassin is running.
if this option is set to 1, if an incoming message is tagged as spam, instead of modifying the original message, SpamAssassin will create a new report message and attach the original message as a message/rfc822 MIME part (ensuring the original message is completely preserved, not easily opened, and easier to recover).
If this option is set to 2, then original messages will be attached with a content type of text/plain instead of message/rfc822. This setting may be required for safety reasons on certain broken mail clients that automatically load attachments without any action by the user. This setting may also make it somewhat more difficult to extract or view the original message.
If this option is set to 0, incoming spam is only modified by adding some X-Spam- headers and no changes will be made to the body. In addition, a header named X-Spam-Report will be added to spam. You can use the remove_header option to remove that header after setting report_safe to 0.
See report_safe_copy_headers if you want to copy headers from the original mail into tagged messages.
This option sets the wrap width for description lines in the X-Spam-Report header, not accounting for tab width.
This option is used to specify which locales are considered OK for incoming mail. Mail using the character sets that are allowed by this option will not be marked as possibly being spam in a foreign language.
If you receive lots of spam in foreign languages, and never get any non-spam in these languages, this may help. Note that all ISO-8859-* character sets, and Windows code page character sets, are always permitted by default.
Set this to all to allow all character sets. This is the default.
The rules CHARSET_FARAWAY, CHARSET_FARAWAY_BODY, and CHARSET_FARAWAY_HEADERS are triggered based on how this is set.
Examples:
ok_locales all (allow all locales)
ok_locales en (only allow English)
ok_locales en ja zh (allow English, Japanese, and Chinese)Note: if there are multiple ok_locales lines, only the last one is used.
Select the locales to allow from the list below:
Whether to decode non- UTF-8 and non-ASCII textual parts and recode them to UTF-8 before the text is given over to rules processing. The character set used for attempted decoding is primarily based on a declared character set in a Content-Type header, but if the decoding attempt fails a module Encode::Detect::Detector is consulted (if available) to provide a guess based on the actual text, and decoding is re-attempted. Even if the option is enabled no unnecessary decoding and re-encoding work is done when possible (like with an all-ASCII text with a US-ASCII or extended ASCII character set declaration, e.g. UTF-8 or ISO-8859-nn or Windows-nnnn).
Unicode support in old versions of perl or in a core module Encode is likely to be buggy in places, so if the normalize_charset function is enabled it is advised to stick to more recent versions of perl (preferably 5.12 or later). The module Encode::Detect::Detector is optional, when necessary it will be used if it is available.
What networks or hosts are 'trusted' in your setup. Trusted in this case means that relay hosts on these networks are considered to not be potentially operated by spammers, open relays, or open proxies. A trusted host could conceivably relay spam, but will not originate it, and will not forge header data. DNS blacklist checks will never query for hosts on these networks.
See http://wiki.apache.org/spamassassin/TrustPath for more information.
MXes for your domain(s) and internal relays should also be specified using the internal_networks setting. When there are 'trusted' hosts that are not MXes or internal relays for your domain(s) they should only be specified in trusted_networks.
The IPaddress can be an IPv4 address (in a dot-quad form), or an IPv6 address optionally enclosed in square brackets. Scoped link-local IPv6 addresses are syntactically recognized but the interface scope is currently ignored (e.g. [fe80::1234%eth0] ) and should be avoided.
If a /masklen is specified, it is considered a CIDR-style 'netmask' length, specified in bits. If it is not specified, but less than 4 octets of an IPv4 address are specified with a trailing dot, an implied netmask length covers all addresses in remaining octets (i.e. implied masklen is /8 or /16 or /24). If masklen is not specified, and there is not trailing dot, then just a single IP address specified is used, as if the masklen were /32 with an IPv4 address, or /128 in case of an IPv6 address.
If a network or host address is prefaced by a ! the matching network or host will be excluded from the list even if a less specific (shorter netmask length) subnet is later specified in the list. This allows a subset of a wider network to be exempt. In case of specifying overlapping subnets, specify more specific subnets first (tighter matching, i.e. with a longer netmask length), followed by less specific (shorter netmask length) subnets to get predictable results regardless of the search algorithm used - when Net::Patricia module is installed the search finds the tightest matching entry in the list, while a sequential search as used in absence of the module Net::Patricia will find the first matching entry in the list.
Note: 127.0.0.0/8 and ::1 are always included in trusted_networks, regardless of your config.
Examples:
trusted_networks 192.168.0.0/16 # all in 192.168.*.*
trusted_networks 192.168. # all in 192.168.*.*
trusted_networks 212.17.35.15 # just that host
trusted_networks !10.0.1.5 10.0.1/24 # all in 10.0.1.* but not 10.0.1.5
trusted_networks 2001:db8:1::1 !2001:db8:1::/64 2001:db8::/32
# 2001:db8::/32 and 2001:db8:1::1/128, except the rest of 2001:db8:1::/64This operates additively, so a trusted_networks line after another one will append new entries to the list of trusted networks. To clear out the existing entries, use clear_trusted_networks.
If trusted_networks is not set and internal_networks is, the value of internal_networks will be used for this parameter.
If neither trusted_networks or internal_networks is set, a basic inference algorithm is applied. This works as follows:
If the 'from' host has an IP address in a private (RFC 1918) network range, then it's trusted
If there are authentication tokens in the received header, and the previous host was trusted, then this host is also trusted
Otherwise this host, and all further hosts, are consider untrusted.
Empty the list of trusted networks.
What networks or hosts are 'internal' in your setup. Internal means that relay hosts on these networks are considered to be MXes for your domain(s), or internal relays. This uses the same syntax as trusted_networks, above - see there for details.
This value is used when checking 'dial-up' or dynamic IP address blocklists, in order to detect direct-to-MX spamming.
Trusted relays that accept mail directly from dial-up connections (i.e. are also performing a role of mail submission agents - MSA) should not be listed in internal_networks. List them only in trusted_networks.
If trusted_networks is set and internal_networks is not, the value of trusted_networks will be used for this parameter.
If neither trusted_networks nor internal_networks is set, no addresses will be considered local; in other words, any relays past the machine where SpamAssassin is running will be considered external.
Every entry in internal_networks must appear in trusted_networks; in other words, internal_networks is always a subset of the trusted set.
Note: 127/8 and ::1 are always included in internal_networks, regardless of your config.
Empty the list of internal networks.
The networks or hosts which are acting as MSAs in your setup (but not also as MX relays). This uses the same syntax as trusted_networks, above - see there for details.
MSA means that the relay hosts on these networks accept mail from your own users and authenticates them appropriately. These relays will never accept mail from hosts that aren't authenticated in some way. Examples of authentication include, IP lists, SMTP AUTH, POP-before-SMTP, etc.
All relays found in the message headers after the MSA relay will take on the same trusted and internal classifications as the MSA relay itself, as defined by your trusted_networks and internal_networks configuration.
For example, if the MSA relay is trusted and internal so will all of the relays that precede it.
When using msa_networks to identify an MSA it is recommended that you treat that MSA as both trusted and internal. When an MSA is not included in msa_networks you should treat the MSA as trusted but not internal, however if the MSA is also acting as an MX or intermediate relay you must always treat it as both trusted and internal and ensure that the MSA includes visible auth tokens in its Received header to identify submission clients.
Warning: Never include an MSA that also acts as an MX (or is also an intermediate relay for an MX) or otherwise accepts mail from non-authenticated users in msa_networks. Doing so will result in unknown external relays being trusted.
Empty the list of msa networks.
A list of header field names from which an originating IP address can be obtained. For example, webmail servers may record a client IP address in X-Originating-IP.
These IP addresses are virtually appended into the Received: chain, so they are used in RBL checks where appropriate.
Currently the IP addresses are not added into X-Spam-Relays-* header fields, but they may be in the future.
Empty the list of 'originating IP address' header field names.
Trust the envelope sender even if the message has been passed through one or more trusted relays. See also envelope_sender_header.
Turning on the skip_rbl_checks setting will disable the DNSEval plugin, which implements Real-time Block List (or: Blackhole List) (RBL) lookups.
By default, SpamAssassin will run RBL checks. Individual blocklists may be disabled selectively by setting a score of a corresponding rule to 0.
See also a related configuration parameter skip_uribl_checks, which controls the URIDNSBL plugin (documented in the URIDNSBL man page).
Tells SpamAssassin whether DNS resolving is available or not. A value yes indicates DNS resolving is available, a value no indicates DNS resolving is not available - both of these values apply unconditionally and skip initial DNS tests, which can be slow or unreliable.
When the option value is a test (with or without arguments), SpamAssassin will query some domain names on the internet during initialization, attempting to determine if DNS resolving is working or not. A space-separated list of domain names may be specified explicitly, or left to a built-in default of a dozen or so domain names. From an explicit or a default list a subset of three domain names is picked randomly for checking. The test queries for NS records of these domain: if at least one query returns a success then SpamAssassin considers DNS resolving as available, otherwise not.
The problem is that the test can introduce some startup delay if a network connection is down, and in some cases it can wrongly guess that DNS is unavailable because a test connection failed, what causes disabling several DNS-dependent tests.
Please note, the DNS test queries for NS records, so specify domain names, not host names.
Since version 3.4.0 of SpamAssassin a default setting for option dns_available is yes. A default in older versions was test.
Specifies an IP address of a DNS server, and optionally its port number. The dns_server directive may be specified multiple times, each entry adding to a list of available resolving name servers. The ip-addr-port argument can either be an IPv4 or IPv6 address, optionally enclosed in brackets, and optionally followed by a colon and a port number. In absence of a port number a standard port number 53 is assumed. When an IPv6 address is specified along with a port number, the address must be enclosed in brackets to avoid parsing ambiguity regarding a colon separator. A scoped link-local IP address is allowed (assuming underlying modules allow it).
Examples : dns_server 127.0.0.1 dns_server 127.0.0.1:53 dns_server [127.0.0.1]:53 dns_server [::1]:53 dns_server fe80::1%lo0 dns_server [fe80::1%lo0]:53
In absence of dns_server directives, the list of name servers is provided by Net::DNS module, which typically obtains the list from /etc/resolv.conf, but this may be platform dependent. Please consult the Net::DNS::Resolver documentation for details.
Empty the list of explicitly configured DNS servers through a dns_server directive, falling back to Net::DNS -supplied defaults.
Add the specified ports or ports ranges to the set of allowed port numbers that can be used as local port numbers when sending DNS queries to a resolver.
The argument is a whitespace-separated or a comma-separated list of single port numbers n, or port number pairs (i.e. m-n) delimited by a '-', representing a range. Allowed port numbers are between 1 and 65535.
Directives dns_local_ports_permit and dns_local_ports_avoid are processed in order in which they appear in configuration files. Each directive adds (or subtracts) its subsets of ports to a current set of available ports. Whatever is left in the set by the end of configuration processing is made available to a DNS resolving client code.
If the resulting set of port numbers is empty (see also the directive dns_local_ports_none), then SpamAssassin does not apply its ports randomization logic, but instead leaves the operating system to choose a suitable free local port number.
The initial set consists of all port numbers in the range 1024-65535. Note that system config files already modify the set and remove all the IANA registered port numbers and some other ranges, so there is rarely a need to adjust the ranges by site-specific directives.
See also directives dns_local_ports_permit and dns_local_ports_none.
Remove specified ports or ports ranges from the set of allowed port numbers that can be used as local port numbers when sending DNS queries to a resolver.
Please see directive dns_local_ports_permit for details.
Is a fast shorthand for:
dns_local_ports_avoid 1-65535leaving the set of available DNS query local port numbers empty. In all respects (apart from speed) it is equivalent to the shown directive, and can be freely mixed with dns_local_ports_permit and dns_local_ports_avoid.
If the resulting set of port numbers is empty, then SpamAssassin does not apply its ports randomization logic, but instead leaves the operating system to choose a suitable free local port number.
See also directives dns_local_ports_permit and dns_local_ports_avoid.
If dns_available is set to test, the dns_test_interval time in number of seconds will tell SpamAssassin how often to retest for working DNS. A numeric value is optionally suffixed by a time unit (s, m, h, d, w, indicating seconds (default), minutes, hours, days, weeks).
Provides a (whitespace or comma -separated) list of options applying to DNS resolving. Available options are: rotate, dns0x20 and edns (or edns0). Option name may be negated by prepending a no (e.g. norotate, NoEDNS) to counteract a previously enabled option. Option names are not case-sensitive. The dns_options directive may appear in configuration files multiple times, the last setting prevails.
Option edns (or edsn0) may take a value which specifies a requestor's acceptable UDP payload size according to EDNS0 specifications (RFC 6891, ex RFC 2671) e.g. edns=4096. When EDNS0 is off (noedns or edns=512) a traditional implied UDP payload size is 512 bytes, which is also a minimum allowed value for this option. When the option is specified but a value is not provided, a conservative default of 1220 bytes is implied. It is recommended to keep edns enabled when using a local recursive DNS server which supports EDNS0 (like most modern DNS servers do), a suitable setting in this case is edns=4096, which is also a default. Allowing UDP payload size larger than 512 bytes can avoid truncation of resource records in large DNS responses (like in TXT records of some SPF and DKIM responses, or when an unreasonable number of A records is published by some domain). The option should be disabled when a recursive DNS server is only reachable through non- RFC 6891 compliant middleboxes (such as some old-fashioned firewall) which bans DNS UDP payload sizes larger than 512 bytes. A suitable value when a non-local recursive DNS server is used and a middlebox does allow EDNS0 but blocks fragmented IP packets is perhaps 1220 bytes, allowing a DNS UDP packet to fit within a single IP packet in most cases (a slightly less conservative range would be 1280-1410 bytes).
Option rotate causes SpamAssassin to choose a DNS server at random from all servers listed in /etc/resolv.conf every dns_test_interval seconds, effectively spreading the load over all currently available DNS servers when there are many spamd workers.
Option dns0x20 enables randomization of letters in a DNS query label according to draft-vixie-dnsext-dns0x20, decreasing a chance of collisions of responses (by chance or by a malicious intent) by increasing spread as provided by a 16-bit query ID and up to 16 bits of a port number, with additional bits as encoded by flipping case (upper/lower) of letters in a query. The number of additional random bits corresponds to the number of letters in a query label. Should work reliably with all mainstream DNS servers - do not turn on if you see frequent info messages "dns: no callback for id:" in the log, or if RBL or URIDNS lookups do not work for no apparent reason.
Option allows disabling of rules which would result in a DNS query to one of the listed domains. The first argument must be a literal allow or deny, remaining arguments are domains names.
Most DNS queries (with some exceptions) are subject to dns_query_restriction. A domain to be queried is successively stripped-off of its leading labels (thus yielding a series of its parent domains), and on each iteration a check is made against an associative array generated by dns_query_restriction options. Search stops at the first match (i.e. the tightest match), and the matching entry with its allow or deny value then controls whether a DNS query is allowed to be launched.
If no match is found an implicit default is to allow a query. The purpose of an explicit allow entry is to be able to override a previously configured deny on the same domain or to override an entry (possibly yet to be configured in subsequent config directives) on one of its parent domains. Thus an 'allow zen.spamhaus.org' with a 'deny spamhaus.org' would permit DNS queries on a specific DNS BL zone but deny queries to other zones under the same parent domain.
Domains are matched case-insensitively, no wildcards are recognized, there should be no leading or trailing dot.
Specifying a block on querying a domain name has a similar effect as setting a score of corresponding DNSBL and URIBL rules to zero, and can be a handy alternative to hunting for such rules when a site policy does not allow certain DNS block lists to be queried.
Example: dns_query_restriction deny dnswl.org surbl.org dns_query_restriction allow zen.spamhaus.org dns_query_restriction deny spamhaus.org mailspike.net spamcop.net
The option removes any entries entered by previous 'dns_query_restriction' options, leaving the list empty, i.e. allowing DNS queries for any domain (including any DNS BL zone).
Whether to use any machine-learning classifiers with SpamAssassin, such as the default 'BAYES_*' rules. Setting this to 0 will disable use of any and all human-trained classifiers.
Whether to use the naive-Bayesian-style classifier built into SpamAssassin. This is a master on/off switch for all Bayes-related operations.
Whether to use rules using the naive-Bayesian-style classifier built into SpamAssassin. This allows you to disable the rules while leaving auto and manual learning enabled.
Whether SpamAssassin should automatically feed high-scoring mails (or low-scoring mails, for non-spam) into its learning systems. The only learning system supported currently is a naive-Bayesian-style classifier.
See the documentation for the Mail::SpamAssassin::Plugin::AutoLearnThreshold plugin module for details on how Bayes auto-learning is implemented by default.
Controls which sources in a mail message can contribute tokens (e.g. words, phrases, etc.) to a Bayes classifier. The argument is a space-separated list of keywords: header, visible, invisible, uri, mimepart), each of which may be prefixed by a no to indicate its exclusion. Additionally two reserved keywords are allowed: all and none (or: noall). The list of keywords is processed sequentially: a keyword all adds all available keywords to a set being built, a none or noall clears the set, other non-negated keywords are added to the set, and negated keywords are removed from the set. Keywords are case-insensitive.
The default set is: header visible invisible uri, which is equivalent for example to: All NoMIMEpart. The reason why mimepart is not currently in a default set is that it is a newer source (introduced with SpamAssassin version 3.4.1) and not much experience has yet been gathered regarding its usefulness.
See also option bayes_ignore_header for a fine-grained control on individual header fields under the umbrella of a more general keyword header here.
Keywords imply the following data sources:
The bayes_token_sources directive may appear multiple times, its keywords are interpreted sequentially, adding or removing items from the final set as they appear in their order in bayes_token_sources directive(s).
If you receive mail filtered by upstream mail systems, like a spam-filtering ISP or mailing list, and that service adds new headers (as most of them do), these headers may provide inappropriate cues to the Bayesian classifier, allowing it to take a "short cut". To avoid this, list the headers using this setting. Example:
bayes_ignore_header X-Upstream-Spamfilter
bayes_ignore_header X-Upstream-SomethingElseBayesian classification and autolearning will not be performed on mail from the listed addresses. Program sa-learn will also ignore the listed addresses if it is invoked using the --use-ignores option. One or more addresses can be listed, see whitelist_from.
Spam messages from certain senders may contain many words that frequently occur in ham. For example, one might read messages from a preferred bookstore but also get unwanted spam messages from other bookstores. If the unwanted messages are learned as spam then any messages discussing books, including the preferred bookstore and antiquarian messages would be in danger of being marked as spam. The addresses of the annoying bookstores would be listed. (Assuming they were halfway legitimate and didn't send you mail through myriad affiliates.)
Those who have pieces of spam in legitimate messages or otherwise receive ham messages containing potentially spammy words might fear that some spam messages might be in danger of being marked as ham. The addresses of the spam mailing lists, correspondents, etc. would be listed.
Bayesian classification and autolearning will not be performed on mail to the listed addresses. See bayes_ignore_from for details.
To be accurate, the Bayes system does not activate until a certain number of ham (non-spam) and spam have been learned. The default is 200 of each ham and spam, but you can tune these up or down with these two settings.
The Bayes system will, by default, learn any reported messages (spamassassin -r) as spam. If you do not want this to happen, set this option to 0.
Used by BayesStore::SQL storage implementation.
If this options is set the BayesStore::SQL module will override the set username with the value given. This could be useful for implementing global or group bayes databases.
Should the Bayesian classifier use hapaxes (words/tokens that occur only once) when classifying? This produces significantly better hit-rates.
SpamAssassin will opportunistically sync the journal and the database. It will do so once a day, but will sync more often if the journal file size goes above this setting, in bytes. If set to 0, opportunistic syncing will not occur.
What should be the maximum size of the Bayes tokens database? When expiry occurs, the Bayes system will keep either 75% of the maximum value, or 100,000 tokens, whichever has a larger value. 150,000 tokens is roughly equivalent to a 8Mb database file.
If enabled, the Bayes system will try to automatically expire old tokens from the database. Auto-expiry occurs when the number of tokens in the database surpasses the bayes_expiry_max_db_size value. If a bayes datastore backend does not implement individual key/value expirations, the setting is silently ignored.
Time-to-live / expiration time in seconds for tokens kept in a Bayes database. A numeric value is optionally suffixed by a time unit (s, m, h, d, w, indicating seconds (default), minutes, hours, days, weeks).
If bayes_auto_expire is true and a Bayes datastore backend supports it (currently only Redis), this setting controls deletion of expired tokens from a bayes database. The value is observed on a best-effort basis, exact timing promises are not necessarily kept. If a bayes datastore backend does not implement individual key/value expirations, the setting is silently ignored.
Time-to-live / expiration time in seconds for 'seen' entries (i.e. mail message digests with their status) kept in a Bayes database. A numeric value is optionally suffixed by a time unit (s, m, h, d, w, indicating seconds (default), minutes, hours, days, weeks).
If bayes_auto_expire is true and a Bayes datastore backend supports it (currently only Redis), this setting controls deletion of expired 'seen' entries from a bayes database. The value is observed on a best-effort basis, exact timing promises are not necessarily kept. If a bayes datastore backend does not implement individual key/value expirations, the setting is silently ignored.
If this option is set, whenever SpamAssassin does Bayes learning, it will put the information into the journal instead of directly into the database. This lowers contention for locking the database to execute an update, but will also cause more access to the journal and cause a delay before the updates are actually committed to the Bayes database.
Specifies a limit on elapsed time in seconds that SpamAssassin is allowed to spend before providing a result. The value may be fractional and must not be negative, zero is interpreted as unlimited. The default is 300 seconds for consistency with the spamd default setting of --timeout-child .
This is a best-effort advisory setting, processing will not be abruptly aborted at an arbitrary point in processing when the time limit is exceeded, but only on reaching one of locations in the program flow equipped with a time test. Currently equipped with the test are the main checking loop, asynchronous DNS lookups, plugins which are calling external programs. Rule evaluation is guarded by starting a timer (alarm) on each set of compiled rules.
When a message is passed to Mail::SpamAssassin::parse, a deadline time is established as a sum of current time and the time_limit setting.
This deadline may also be specified by a caller through an option 'master_deadline' in $suppl_attrib on a call to parse(), possibly providing a more accurate deadline taking into account past and expected future processing of a message in a mail filtering setup. If both the config option as well as a 'master_deadline' option in a call are provided, the shorter time limit of the two is used (since version 3.3.2). Note that spamd (and possibly third-party callers of SpamAssassin) will supply the 'master_deadline' option in a call based on its --timeout-child option (or equivalent), unlike the command line spamassassin, which has no such command line option.
When a time limit is exceeded, most of the remaining tests will be skipped, as well as auto-learning. Whatever tests fired so far will determine the final score. The behaviour is similar to short-circuiting with attribute 'on', as implemented by a Shortcircuit plugin. A synthetic hit on a rule named TIME_LIMIT_EXCEEDED with a near-zero default score is generated, so that the report will reflect the event. A score for TIME_LIMIT_EXCEEDED may be provided explicitly in a configuration file, for example to achieve whitelisting or blacklisting effect for messages with long processing times.
The time_limit option is a useful protection against excessive processing time on certain degenerate or unusually long or complex mail messages, as well as against some DoS attacks. It is also needed in time-critical pre-queue filtering setups (e.g. milter, proxy, integration with MTA), where message processing must finish before a SMTP client times out. RFC 5321 prescribes in section 4.5.3.2.6 the 'DATA Termination' time limit of 10 minutes, although it is not unusual to see some SMTP clients abort sooner on waiting for a response. A sensible time_limit for a pre-queue filtering setup is maybe 50 seconds, assuming that clients are willing to wait at least a minute.
Select the file-locking method used to protect database files on-disk. By default, SpamAssassin uses an NFS-safe locking method on UNIX; however, if you are sure that the database files you'll be using for Bayes and AWL storage will never be accessed over NFS, a non-NFS-safe locking system can be selected.
This will be quite a bit faster, but may risk file corruption if the files are ever accessed by multiple clients at once, and one or more of them is accessing them through an NFS filesystem.
Note that different platforms require different locking systems.
The supported locking systems for type are as follows:
flock() lockingsysopen (..., O_CREAT|O_EXCL).nfssafe and flock are only available on UNIX, and win32 is only available on Windows. By default, SpamAssassin will choose either nfssafe or win32 depending on the platform in use.
By default, headers added by SpamAssassin will be whitespace folded. In other words, they will be broken up into multiple lines instead of one very long one and each continuation line will have a tabulator prepended to mark it as a continuation of the preceding one.
The automatic wrapping can be disabled here. Note that this can generate very long lines. RFC 2822 required that header lines do not exceed 998 characters (not counting the final CRLF).
If using report_safe, a few of the headers from the original message are copied into the wrapper header (From, To, Cc, Subject, Date, etc.) If you want to have other headers copied as well, you can add them using this option. You can specify multiple headers on the same line, separated by spaces, or you can just use multiple lines.
SpamAssassin will attempt to discover the address used in the 'MAIL FROM:' phase of the SMTP transaction that delivered this message, if this data has been made available by the SMTP server. This is used in the EnvelopeFrom pseudo-header, and for various rules such as SPF checking.
By default, various MTAs will use different headers, such as the following:
X-Envelope-From
Envelope-Sender
X-Sender
Return-PathSpamAssassin will attempt to use these, if some heuristics (such as the header placement in the message, or the absence of fetchmail signatures) appear to indicate that they are safe to use. However, it may choose the wrong headers in some mailserver configurations. (More discussion of this can be found in bug 2142 and bug 4747 in the SpamAssassin BugZilla.)
To avoid this heuristic failure, the envelope_sender_header setting may be helpful. Name the header that your MTA or MDA adds to messages containing the address used at the MAIL FROM step of the SMTP transaction.
If the header in question contains < or > characters at the start and end of the email address in the right-hand side, as in the SMTP transaction, these will be stripped.
If the header is not found in a message, or if it's value does not contain an @ sign, SpamAssassin will issue a warning in the logs and fall back to its default heuristics.
(Note for MTA developers: we would prefer if the use of a single header be avoided in future, since that precludes 'downstream' spam scanning. http://wiki.apache.org/spamassassin/EnvelopeSenderInReceived details a better proposal, storing the envelope sender at each hop in the Received header.)
example:
envelope_sender_header X-SA-Exim-Mail-FromUsed to describe a test. This text is shown to users in the detailed report.
Note that test names which begin with '__' are reserved for meta-match sub-rules, and are not scored or listed in the 'tests hit' reports.
Also note that by convention, rule descriptions should be limited in length to no more than 50 characters.
Set the MIME Content-Type charset used for the text/plain report which is attached to spam mail messages.
Set the report template which is attached to spam mail messages. See the 10_default_prefs.cf configuration file in /usr/share/spamassassin for an example.
If you change this, try to keep it under 78 columns. Each report line appends to the existing template, so use clear_report_template to restart.
Tags can be included as explained above.
Clear the report template.
Set what _CONTACTADDRESS_ is replaced with in the above report text. By default, this is 'the administrator of that system', since the hostname of the system the scanner is running on is also included.
Set what _HOSTNAME_ is replaced with in the above report text. By default, this is determined dynamically as whatever the host running SpamAssassin calls itself.
Set the report template which is attached to spam mail messages which contain a non-text/plain part. See the 10_default_prefs.cf configuration file in /usr/share/spamassassin for an example.
Each unsafe-report line appends to the existing template, so use clear_unsafe_report_template to restart.
Tags can be used in this template (see above for details).
Clear the unsafe_report template.
Set a specific regular expression to be used for mbox file From separators.
For example, this setting will allow sa-learn to process emails stored in a kmail 2 mbox:
mbox_format_from_regex /^From \S+ ?[[:upper:]][[:lower:]]{2}(?:, \d\d [[:upper:]][[:lower:]]{2} \d{4} [0-2]\d:\d\d:\d\d [+-]\d{4}| [[:upper:]][[:lower:]]{2} [ 1-3]\d [ 0-2]\d:\d\d:\d\d \d{4})/
If this option is set to 1 and the message contains DKIM headers, the headers will be parsed for URIs to process alongside URIs found in the body with some rules and modules (ex. URIDNSBL)
These settings differ from the ones above, in that they are considered 'privileged'. Only users running spamassassin from their procmailrc's or forward files, or sysadmins editing a file in /etc/mail/spamassassin, can use them. spamd users cannot use them in their user_prefs files, for security and efficiency reasons, unless allow_user_rules is enabled (and then, they may only add rules from below).
This setting allows users to create rules (and only rules) in their user_prefs files for use with spamd. It defaults to off, because this could be a severe security hole. It may be possible for users to gain root level access if spamd is run as root. It is NOT a good idea, unless you have some other way of ensuring that users' tests are safe. Don't use this unless you are certain you know what you are doing. Furthermore, this option causes spamassassin to recompile all the tests each time it processes a message for a user with a rule in his/her user_prefs file, which could have a significant effect on server load. It is not recommended.
Note that it is not currently possible to use allow_user_rules to modify an existing system rule from a user_prefs file with spamd.
A regex pattern that matches both the redirector site portion, and the target site portion of a URI.
Note: The target URI portion must be surrounded in parentheses and no other part of the pattern may create a backreference.
Example: http://chkpt.zdnet.com/chkpt/whatever/spammer.domain/yo/dude
redirector_pattern /^https?:\/\/(?:opt\.)?chkpt\.zdnet\.com\/chkpt\/\w+\/(.*)$/iDefine a test. SYMBOLIC_TEST_NAME is a symbolic test name, such as 'FROM_ENDS_IN_NUMS'. header is the name of a mail header field, such as 'Subject', 'To', 'From', etc. Header field names are matched case-insensitively (conforming to RFC 5322 section 1.2.2), except for all-capitals metaheader fields such as ALL, MESSAGEID, ALL-TRUSTED.
Appending a modifier :raw to a header field name will inhibit decoding of quoted-printable or base-64 encoded strings, and will preserve all whitespace inside the header string. The :raw may also be applied to pseudo-headers e.g. ALL:raw will return a pristine (unmodified) header section.
Appending a modifier :addr to a header field name will cause everything except the first email address to be removed from the header field. It is mainly applicable to header fields 'From', 'Sender', 'To', 'Cc' along with their 'Resent-*' counterparts, and the 'Return-Path'.
Appending a modifier :name to a header field name will cause everything except the first display name to be removed from the header field. It is mainly applicable to header fields containing a single mail address: 'From', 'Sender', along with their 'Resent-From' and 'Resent-Sender' counterparts.
It is syntactically permitted to append more than one modifier to a header field name, although currently most combinations achieve no additional effect, for example From:addr:raw or From:raw:addr is currently the same as From:addr .
For example, appending :addr to a header name will result in example@foo in all of the following cases:
For example, appending :name to a header name will result in "Foo Blah" (without quotes) in all of the following cases:
There are several special pseudo-headers that can be specified:
ALL can be used to mean the text of all the message's headers. Note that all whitespace inside the headers, at line folds, is currently compressed into a single space (' ') character. To obtain a pristine (unmodified) header section, use ALL:raw - the :raw modifier is documented above. Also similar that return headers added by specific relays: ALL-TRUSTED, ALL-INTERNAL, ALL-UNTRUSTED, ALL-EXTERNAL.ToCc can be used to mean the contents of both the 'To' and 'Cc' headers.EnvelopeFrom is the address used in the 'MAIL FROM:' phase of the SMTP transaction that delivered this message, if this data has been made available by the SMTP server. See envelope_sender_header for more information on how to set this.MESSAGEID is a symbol meaning all Message-Id's found in the message; some mailing list software moves the real 'Message-Id' to 'Resent-Message-Id' or to 'X-Message-Id', then uses its own one in the 'Message-Id' header. The value returned for this symbol is the text from all 3 headers, separated by newlines.X-Spam-Relays-Untrusted, X-Spam-Relays-Trusted, X-Spam-Relays-Internal and X-Spam-Relays-External represent a portable, pre-parsed representation of the message's network path, as recorded in the Received headers, divided into 'trusted' vs 'untrusted' and 'internal' vs 'external' sets. See http://wiki.apache.org/spamassassin/TrustedRelays for more details.op is either =~ (contains regular expression) or !~ (does not contain regular expression), and pattern is a valid Perl regular expression, with modifiers as regexp modifiers in the usual style. Note that multi-line rules are not supported, even if you use x as a modifier. Also note that the # character must be escaped (\#) or else it will be considered to be the start of a comment and not part of the regexp.
If the header specified matches multiple headers, their text will be concatenated with embedded \n's. Therefore you may wish to use /m if you use ^ or $ in your regular expression.
If the [if-unset: STRING] tag is present, then STRING will be used if the header is not found in the mail message.
Test names must not start with a number, and must contain only alphanumerics and underscores. It is suggested that lower-case characters not be used, and names have a length of no more than 22 characters, as an informal convention. Dashes are not allowed.
Note that test names which begin with '__' are reserved for meta-match sub-rules, and are not scored or listed in the 'tests hit' reports. Test names which begin with 'T_' are reserved for tests which are undergoing QA, and these are given a very low score.
If you add or modify a test, please be sure to run a sanity check afterwards by running spamassassin --lint. This will avoid confusing error messages, or other tests being skipped as a side-effect.
Define a header field existence test. header_field_name is the name of a header field to test for existence. Not to be confused with a test for a nonempty header field body, which can be implemented by a header SYMBOLIC_TEST_NAME header =~ /\S/ rule as described above.
Define a header eval test. name_of_eval_method is the name of a method registered by a Mail::SpamAssassin::Plugin object. arguments are optional arguments to the function call.
Check a DNSBL (a DNS blacklist or whitelist). This will retrieve Received: headers from the message, extract the IP addresses, select which ones are 'untrusted' based on the trusted_networks logic, and query that DNSBL zone. There's a few things to note:
Duplicated IPs are only queried once and reserved IPs are not queried. Private IPs are those listed in https://www.iana.org/assignments/ipv4-address-space, http://duxcw.com/faq/network/privip.htm, http://duxcw.com/faq/network/autoip.htm, or https://tools.ietf.org/html/rfc5735 as private.
This is used as a 'zone ID'. If you want to look up a multiple-meaning zone like SORBS, you can then query the results from that zone using it; but all check_rbl_sub() calls must use that zone ID.
Also, if more than one IP address gets a DNSBL hit for a particular rule, it does not affect the score because rules only trigger once per message.
This is the root zone of the DNSBL.
The domain name is considered to be a fully qualified domain name (i.e. not subject to DNS resolver's search or default domain options). No trailing period is needed, and will be removed if specified.
This optional argument behaves the same as the sub-test argument in check_rbl_sub() below.
This is accomplished by placing '-notfirsthop' at the end of the set name. This is useful for querying against DNS lists which list dialup IP addresses; the first hop may be a dialup, but as long as there is at least one more hop, via their outgoing SMTP server, that's legitimate, and so should not gain points. If there is only one hop, that will be queried anyway, as it should be relaying via its outgoing SMTP server instead of sending directly to your MX (mail exchange).
When checking a 'nice' DNSBL (a DNS whitelist), you cannot trust the IP addresses in Received headers that were not added by trusted relays. To test the first IP address that can be trusted, place '-firsttrusted' at the end of the set name. That should test the IP address of the relay that connected to the most remote trusted relay.
Note that this requires that SpamAssassin know which relays are trusted. For simple cases, SpamAssassin can make a good estimate. For complex cases, you may get better results by setting trusted_networks manually.
In addition, you can test all untrusted IP addresses by placing '-untrusted' at the end of the set name. Important note -- this does NOT include the IP address from the most recent 'untrusted line', as used in '-firsttrusted' above. That's because we're talking about the trustworthiness of the IP address data, not the source header line, here; and in the case of the most recent header (the 'firsttrusted'), that data can be trusted. See the Wiki page at http://wiki.apache.org/spamassassin/TrustedRelays for more information on this.
By using '-lastexternal' at the end of the set name, you can select only the external host that connected to your internal network, or at least the last external host with a public IP.
Same as check_rbl(), except querying using IN TXT instead of IN A records. If the zone supports it, it will result in a line of text describing why the IP is listed, typically a hyperlink to a database entry.
Create a sub-test for 'set'. If you want to look up a multi-meaning zone like relays.osirusoft.com, you can then query the results from that zone using the zone ID from the original query. The sub-test may either be an IPv4 dotted address for RBLs that return multiple A records, or a non-negative decimal number to specify a bitmask for RBLs that return a single A record containing a bitmask of results, or a regular expression.
Note: the set name must be exactly the same for as the main query rule, including selections like '-notfirsthop' appearing at the end of the set name.
Define a body pattern test. pattern is a Perl regular expression. Note: as per the header tests, # must be escaped (\#) or else it is considered the beginning of a comment.
The 'body' in this case is the textual parts of the message body; any non-text MIME parts are stripped, and the message decoded from Quoted-Printable or Base-64-encoded format if necessary. Parts declared as text/html will be rendered from HTML to text.
All body paragraphs (double-newline-separated blocks text) are turned into a line breaks removed, whitespace normalized single line. Any lines longer than 2kB are split into shorter separate lines (from a boundary when possible), this may unexpectedly prevent pattern from matching. Patterns are matched independently against each of these lines.
Note that by default the message Subject header is considered part of the body and becomes the first line when running the rules. If you don't want to match Subject along with body text, use "tflags RULENAME nosubject".
Define a body eval test. See above.
Define a uri pattern test. pattern is a Perl regular expression. Note: as per the header tests, # must be escaped (\#) or else it is considered the beginning of a comment.
The 'uri' in this case is a list of all the URIs in the body of the email, and the test will be run on each and every one of those URIs, adjusting the score if a match is found. Use this test instead of one of the body tests when you need to match a URI, as it is more accurately bound to the start/end points of the URI, and will also be faster.
Define a raw-body pattern test. pattern is a Perl regular expression. Note: as per the header tests, # must be escaped (\#) or else it is considered the beginning of a comment.
The 'raw body' of a message is the raw data inside all textual parts. The text will be decoded from base64 or quoted-printable encoding, but HTML tags and line breaks will still be present. Multiline expressions will need to be used to match strings that are broken by line breaks.
Note that the text is split into 2-4kB chunks (from a word boundary when possible), this may unexpectedly prevent pattern from matching. Patterns are matched independently against each of these chunks.
Define a raw-body eval test. See above.
Define a full message pattern test. pattern is a Perl regular expression. Note: as per the header tests, # must be escaped (\#) or else it is considered the beginning of a comment.
The full message is the pristine message headers plus the pristine message body, including all MIME data such as images, other attachments, MIME boundaries, etc.
Define a full message eval test. See above.
Define a boolean expression test in terms of other tests that have been hit or not hit. For example:
meta META1 TEST1 && !(TEST2 || TEST3)
Note that English language operators ("and", "or") will be treated as rule names, and that there is no XOR operator.
Can also define an arithmetic expression in terms of other tests, with an unhit test having the value "0" and a hit test having a nonzero value. The value of a hit meta test is that of its arithmetic expression. The value of a hit eval test is that returned by its method. The value of a hit header, body, rawbody, uri, or full test which has the "multiple" tflag is the number of times the test hit. The value of any other type of hit test is "1".
For example:
meta META2 (3 * TEST1 - 2 * TEST2) > 0
Note that Perl builtins and functions, like abs(), can't be used, and will be treated as rule names.
If you want to define a meta-rule, but do not want its individual sub-rules to count towards the final score unless the entire meta-rule matches, give the sub-rules names that start with '__' (two underscores). SpamAssassin will ignore these for scoring.
Special function that will expand to list of matching rulenames. Can be used anywhere in expressions. Argument supports glob style rulename matching (* = anything, ? = one character). Matching is case-sensitive.
For example, this will hit if at least two __FOO_* rule hits:
body __FOO_1 /xxx/
body __FOO_2 /yyy/
body __FOO_3 /zzz/
meta FOO_META rules_matching(__FOO_*) >= 2Which would be the same as:
meta FOO_META (__FOO_1 + __FOO_2 + __FOO_3) >= 2Defines the name of a test that should be "reused" during the scoring process. If a message has an X-Spam-Status header that shows a hit for this rule or any of the old rule names given, a hit will be added for this rule when mass-check --reuse is used. Examples:
reuse SPF_PASS
reuse MY_NET_RULE_V2 MY_NET_RULE_V1
The actual logic for reuse tests is done by Mail::SpamAssassin::Plugin::Reuse.
Used to set flags on a test. Parameter is a space-separated list of flag names or flag name = value pairs. These flags are used in the score-determination back end system for details of the test's behaviour. Please see bayes_auto_learn for more information about tflag interaction with those systems. The following flags can be set:
The test is a network test, and will not be run in the mass checking system or if -L is used, therefore its score should not be modified.
The test is intended to compensate for common false positives, and should be assigned a negative score.
The test requires user configuration before it can be used (like language-specific tests).
The test requires training before it can be used.
The test will explicitly be ignored when calculating the score for learning systems.
The test will be subject to less stringent autolearn thresholds.
Normally, SpamAssassin will require 3 points from the header and 3 points from the body to be auto-learned as spam. This option keeps the threshold at 6 points total but changes it to have no regard to the source of the points.
This flag is specific when using AWL plugin.
Normally, AWL plugin normalizes scores via auto-whitelist. In some scenarios it works against the system administrator when trying to add some rules to correct miss-classified email. When AWL plugin searches the email and finds the noawl flag it will exit without normalizing the score nor storing the value in db.
The test will be evaluated multiple times, for use with meta rules. Only affects header, body, rawbody, uri, and full tests.
If multiple is specified, limit the number of hits found to N. If the rule is used in a meta that counts the hits (e.g. __RULENAME > 5), this is a way to avoid wasted extra work (use "tflags multiple maxhits=6").
For example:
uri __KAM_COUNT_URIS /^./
tflags __KAM_COUNT_URIS multiple maxhits=16
describe __KAM_COUNT_URIS A multiple match used to count URIs in a message
meta __KAM_HAS_0_URIS (__KAM_COUNT_URIS == 0)
meta __KAM_HAS_1_URIS (__KAM_COUNT_URIS >= 1)
meta __KAM_HAS_2_URIS (__KAM_COUNT_URIS >= 2)
meta __KAM_HAS_3_URIS (__KAM_COUNT_URIS >= 3)
meta __KAM_HAS_4_URIS (__KAM_COUNT_URIS >= 4)
meta __KAM_HAS_5_URIS (__KAM_COUNT_URIS >= 5)
meta __KAM_HAS_10_URIS (__KAM_COUNT_URIS >= 10)
meta __KAM_HAS_15_URIS (__KAM_COUNT_URIS >= 15)Used only for body rules. If specified, Subject header will not be a part of the matched body text. See body for more info.
This flag is specific to rules invoking an URIDNSBL plugin, it is documented there.
This flag is specific to rules invoking an URIDNSBL plugin, it is documented there.
This flag is specific to rules invoking an URIDNSBL plugin, it is documented there.
This flag is specific to rules invoking an URIDNSBL plugin, it is documented there.
Assign a specific priority to a test. All tests, except for DNS and Meta tests, are run in increasing priority value order (negative priority values are run before positive priority values). The default test priority is 0 (zero).
The values -99999999999999 and -99999999999998 have a special meaning internally, and should not be used.
These settings differ from the ones above, in that they are considered 'more privileged' -- even more than the ones in the PRIVILEGED SETTINGS section. No matter what allow_user_rules is set to, these can never be set from a user's user_prefs file when spamc/spamd is being used. However, all settings can be used by local programs run directly by the user.
This tag is appended to the SA version in the X-Spam-Status header. You should include it when you modify your ruleset, especially if you plan to distribute it. A good choice for string is your last name or your initials followed by a number which you increase with each change.
The version_tag will be lowercased, and any non-alphanumeric or period character will be replaced by an underscore.
e.g.
version_tag myrules1 # version=2.41-myrules1Define a regression testing string. You can have more than one regression test string per symbolic test name. Simply specify a string that you wish the test to match.
These tests are only run as part of the test suite - they should not affect the general running of SpamAssassin.
Per mime-part scan size limit in bytes for "body" type rules. The decoded/stripped mime-part is truncated approx to this size. Helps scanning large messages safely, so it's not necessary to skip them completely. Disabled with 0.
Like body_part_scan_size, for "rawbody" type rules.
All DNS queries are made at the beginning of a check and we try to read the results at the end. This value specifies the maximum period of time (in seconds) to wait for a DNS query. If most of the DNS queries have succeeded for a particular message, then SpamAssassin will not wait for the full period to avoid wasting time on unresponsive server(s), but will shrink the timeout according to a percentage of queries already completed. As the number of queries remaining approaches 0, the timeout value will gradually approach a t_min value, which is an optional second parameter and defaults to 0.2 * t. If t is smaller than t_min, the initial timeout is set to t_min. Here is a chart of queries remaining versus the timeout in seconds, for the default 15 second / 3 second timeout setting:
queries left 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
timeout 15 14.9 14.5 13.9 13.1 12.0 10.7 9.1 7.3 5.3 3For example, if 20 queries are made at the beginning of a message check and 16 queries have returned (leaving 20%), the remaining 4 queries should finish within 7.3 seconds since their query started or they will be timed out. Note that timed out queries are only aborted when there is nothing else left for SpamAssassin to do - long evaluation of other rules may grant queries additional time.
If a parameter 'zone' is specified (it must end with a letter, which distinguishes it from other numeric parametrs), then the setting only applies to DNS queries against the specified DNS domain (host, domain or RBL (sub)zone). Matching is case-insensitive, the actual domain may be a subdomain of the specified zone.
This option maintains list of valid TLDs in the RegistryBoundaries code. TLDs include things like com, net, org, etc.
This option maintains list of valid 2nd-level TLDs in the RegistryBoundaries code. 2TLDs include things like co.uk, fed.us, etc.
This option maintains list of valid 3rd-level TLDs in the RegistryBoundaries code. 3TLDs include things like demon.co.uk, plc.co.im, etc.
Empty internal list of valid TLDs (including 2nd and 3rd level) which RegistryBoundaries code uses. Only useful if you want to override the standard lists supplied by sa-update.
This is the directory and filename for Bayes databases. Several databases will be created, with this as the base directory and filename, with _toks, _seen, etc. appended to the base. The default setting results in files called ~/.spamassassin/bayes_seen, ~/.spamassassin/bayes_toks, etc.
By default, each user has their own in their ~/.spamassassin directory with mode 0700/0600. For system-wide SpamAssassin use, you may want to reduce disk space usage by sharing this across all users. However, Bayes appears to be more effective with individual user databases.
The file mode bits used for the Bayesian filtering database files.
Make sure you specify this using the 'x' mode bits set, as it may also be used to create directories. However, if a file is created, the resulting file will not have any execute bits set (the umask is set to 111). The argument is a string of octal digits, it is converted to a numeric value internally.
If this option is set, the module given will be used as an alternate to the default bayes storage mechanism. It must conform to the published storage specification (see Mail::SpamAssassin::BayesStore). For example, set this to Mail::SpamAssassin::BayesStore::SQL to use the generic SQL storage module.
Used for BayesStore::SQL storage implementation.
This option give the connect string used to connect to the SQL based Bayes storage.
Used by BayesStore::SQL storage implementation.
This option gives the username used by the above DSN.
Used by BayesStore::SQL storage implementation.
This option gives the password used by the above DSN.
Whether to call the services_authorized_for_username plugin hook in BayesSQL. If the hook does not determine that the user is allowed to use bayes or is invalid then then database will not be initialized.
NOTE: By default the user is considered invalid until a plugin returns a true value. If you enable this, but do not have a proper plugin loaded, all users will turn up as invalid.
The username passed into the plugin can be affected by the bayes_sql_override_username config option.
If you load user scores from an SQL database, this will set the DSN used to connect. Example: DBI:mysql:spamassassin:localhost
If you load user scores from an LDAP directory, this will set the DSN used to connect. You have to write the DSN as an LDAP URL, the components being the host and port to connect to, the base DN for the search, the scope of the search (base, one or sub), the single attribute being the multivalued attribute used to hold the configuration data (space separated pairs of key and value, just as in a file) and finally the filter being the expression used to filter out the wanted username. Note that the filter expression is being used in a sprintf statement with the username as the only parameter, thus is can hold a single __USERNAME__ expression. This will be replaced with the username.
Example: ldap://localhost:389/dc=koehntopp,dc=de?saconfig?uid=__USERNAME__
The authorized username to connect to the above DSN.
The password for the database username, for the above DSN.
This option gives you the ability to create a custom SQL query to retrieve user scores and preferences. In order to work correctly your query should return two values, the preference name and value, in that order. In addition, there are several "variables" that you can use as part of your query, these variables will be substituted for the current values right before the query is run. The current allowed variables are:
The name of the table where user scores and preferences are stored. Currently hardcoded to userpref, to change this value you need to create a new custom query with the new table name.
The current user's username.
The portion before the @ as derived from the current user's username.
The portion after the @ as derived from the current user's username, this value may be null.
The query must be one continuous line in order to parse correctly.
Here are several example queries, please note that these are broken up for easy reading, in your config it should be one continuous line.
SELECT preference, value FROM _TABLE_ WHERE username = _USERNAME_ OR username = '@GLOBAL' ORDER BY username ASC
SELECT preference, value FROM _TABLE_ WHERE username = _USERNAME_ OR username = '@GLOBAL' OR username = '@~'||_DOMAIN_ ORDER BY username ASC
SELECT preference, value FROM _TABLE_ WHERE username = _USERNAME_ OR username = '@GLOBAL' ORDER BY username DESC
This is the Bind DN used to connect to the LDAP server. It defaults to the empty string (""), allowing anonymous binding to work.
Example: cn=master,dc=koehntopp,dc=de
This is the password used to connect to the LDAP server. It defaults to the empty string ("").
Fall back to global scores and settings if userprefs can't be loaded from SQL or LDAP, instead of passing the message through unprocessed.
Load a SpamAssassin plugin module. The ModuleName is the perl module name, used to create the plugin object itself.
Module naming is strict, name must only contain alphanumeric characters or underscores. File must have .pm extension.
/path/module.pm is the file to load, containing the module's perl code; if it's specified as a relative path, it's considered to be relative to the current configuration file. If it is omitted, the module will be loaded using perl's search path (the @INC array).
See Mail::SpamAssassin::Plugin for more details on writing plugins.
Same as loadplugin, but silently ignored if the .pm file cannot be found in the filesystem.
Ignore any rule which contains a regexp which always matches. Currently only catches regexps which contain '||', or which begin or end with a '|'. Also ignore rules with some combinatorial explosions.
Include configuration lines from filename. Relative paths are considered relative to the current configuration file or user preferences file.
Used to support conditional interpretation of the configuration file. Lines between this and a corresponding else or endif line will be ignored unless the expression evaluates as true (in the perl sense; that is, defined and non-0 and non-empty string).
The conditional accepts a limited subset of perl for security -- just enough to perform basic arithmetic comparisons. The following input is accepted:
Namely these characters and ranges:
( ) - + * / _ . , < = > ! ~ 0-9 whitespaceThis will be replaced with the version number of the currently-running SpamAssassin engine. Note: The version used is in the internal SpamAssassin version format which is x.yyyzzz, where x is major version, y is minor version, and z is maintenance version. So 3.0.0 is 3.000000, and 3.4.80 is 3.004080.
(Introduced in 3.4.1) This will be replaced with the version number of the currently-running perl engine. Note: The version used is in the $] version format which is x.yyyzzz, where x is major version, y is minor version, and z is maintenance version. So 5.8.8 is 5.008008, and 5.10.0 is 5.010000. Use to protect rules that incorporate RE syntax elements introduced in later versions of perl, such as the ++ non-backtracking match introduced in perl 5.10. For example:
# Avoid lint error on older perl installs
# Check SA version first to avoid warnings on checking perl_version on older SA
if version > 3.004001 && perl_version >= 5.018000
body INVALID_RE_SYNTAX_IN_PERL_BEFORE_5_18 /(?[ \p{Thai} & \p{Digit} ])/
endifNote that the above will still generate a warning on perl older than 5.10.0; to avoid that warning do this instead:
# Avoid lint error on older perl installs
if can(Mail::SpamAssassin::Conf::perl_min_version_5010000)
body INVALID_RE_SYNTAX_IN_PERL_5_8 /\w++/
endifWarning: a can() test is only defined for perl 5.10.0!
This is a function call that returns 1 if the plugin named Name::Of::Plugin is loaded, or undef otherwise.
This is a function call that returns 1 if the perl package named Name::Of::Package includes a function called function_name, or undef otherwise. Note that packages can be SpamAssassin plugins or built-in classes, there's no difference in this respect. Internally this invokes UNIVERSAL::can.
This is a function call that returns 1 if the perl package named Name::Of::Package includes a function called function_name and that function returns a true value when called with no arguments, otherwise undef is returned.
Is similar to has, except that it also calls the named function, testing its return value (unlike the perl function UNIVERSAL::can). This makes it possible for a 'feature' function to determine its result value at run time.
If the end of a configuration file is reached while still inside a if scope, a warning will be issued, but parsing will restart on the next file.
For example:
if (version > 3.000000)
header MY_FOO ...
endif
loadplugin MyPlugin plugintest.pm
if plugin (MyPlugin)
header MY_PLUGIN_FOO eval:check_for_foo()
score MY_PLUGIN_FOO 0.1
endifAn alias for if plugin(PluginModuleName).
Used to support conditional interpretation of the configuration file. Lines between this and a corresponding endif line, will be ignored unless the conditional expression evaluates as false (in the perl sense; that is, not defined and not 0 and non-empty string).
Indicates that the entire file, from this line on, requires a certain version of SpamAssassin to run. If a different (older or newer) version of SpamAssassin tries to read the configuration from this file, it will output a warning instead, and ignore it.
Note: The version used is in the internal SpamAssassin version format which is x.yyyzzz, where x is major version, y is minor version, and z is maintenance version. So 3.0.0 is 3.000000, and 3.4.80 is 3.004080.
The following tags can be used as placeholders in certain options. They will be replaced by the corresponding value when they are used.
Some tags can take an argument (in parentheses). The argument is optional, and the default is shown below.
_YESNO_ "Yes" for spam, "No" for nonspam (=ham)
_YESNO(spam_str,ham_str)_ returns the first argument ("Yes" if missing)
for spam, and the second argument ("No" if missing) for ham
_YESNOCAPS_ "YES" for spam, "NO" for nonspam (=ham)
_YESNOCAPS(spam_str,ham_str)_ same as _YESNO(...)_, but uppercased
_SCORE(PAD)_ message score, if PAD is included and is either spaces or
zeroes, then pad scores with that many spaces or zeroes
(default, none) ie: _SCORE(0)_ makes 2.4 become 02.4,
_SCORE(00)_ is 002.4. 12.3 would be 12.3 and 012.3
respectively.
_REQD_ message threshold
_VERSION_ version (eg. 3.0.0 or 3.1.0-r26142-foo1)
_SUBVERSION_ sub-version/code revision date (eg. 2004-01-10)
_RULESVERSION_ comma-separated list of rules versions, retrieved from
an '# UPDATE version' comment in rules files; if there is
more than one set of rules (update channels) the order
is unspecified (currently sorted by names of files);
_HOSTNAME_ hostname of the machine the mail was processed on
_REMOTEHOSTNAME_ hostname of the machine the mail was sent from, only
available with spamd
_REMOTEHOSTADDR_ ip address of the machine the mail was sent from, only
available with spamd
_BAYES_ bayes score
_TOKENSUMMARY_ number of new, neutral, spammy, and hammy tokens found
_BAYESTC_ number of new tokens found
_BAYESTCLEARNED_ number of seen tokens found
_BAYESTCSPAMMY_ number of spammy tokens found
_BAYESTCHAMMY_ number of hammy tokens found
_HAMMYTOKENS(N)_ the N most significant hammy tokens (default, 5)
_SPAMMYTOKENS(N)_ the N most significant spammy tokens (default, 5)
_DATE_ rfc-2822 date of scan
_STARS(*)_ one "*" (use any character) for each full score point
(note: limited to 50 'stars')
_SENDERDOMAIN_ a domain name of the envelope sender address, lowercased
_AUTHORDOMAIN_ a domain name of the author address (the From header
field), lowercased; note that RFC 5322 allows a mail
message to have multiple authors - currently only the
domain name of the first email address is returned
_RELAYSTRUSTED_ relays used and deemed to be trusted (see the
'X-Spam-Relays-Trusted' pseudo-header)
_RELAYSUNTRUSTED_ relays used that can not be trusted (see the
'X-Spam-Relays-Untrusted' pseudo-header)
_RELAYSINTERNAL_ relays used and deemed to be internal (see the
'X-Spam-Relays-Internal' pseudo-header)
_RELAYSEXTERNAL_ relays used and deemed to be external (see the
'X-Spam-Relays-External' pseudo-header)
_LASTEXTERNALIP_ IP address of client in the external-to-internal
SMTP handover
_LASTEXTERNALRDNS_ reverse-DNS of client in the external-to-internal
SMTP handover
_LASTEXTERNALHELO_ HELO string used by client in the external-to-internal
SMTP handover
_AUTOLEARN_ autolearn status ("ham", "no", "spam", "disabled",
"failed", "unavailable")
_AUTOLEARNSCORE_ portion of message score used by autolearn
_TESTS(,)_ tests hit separated by "," (or other separator)
_TESTSSCORES(,)_ as above, except with scores appended (eg. AWL=-3.0,...)
_SUBTESTS(,)_ subtests (start with "__") hit separated by ","
(or other separator)
_SUBTESTSCOLLAPSED(,)_ subtests (start with "__") hit separated by ","
(or other separator) with duplicated rules collapsed
_DCCB_ DCC's "Brand"
_DCCR_ DCC's results
_PYZOR_ Pyzor results
_RBL_ full results for positive RBL queries in DNS URI format
_LANGUAGES_ possible languages of mail
_PREVIEW_ content preview
_REPORT_ terse report of tests hit (for header reports)
_SUBJPREFIX_ subject prefix based on rules, to be prepended to Subject
header by SpamAssassin caller
_SUMMARY_ summary of tests hit for standard report (for body reports)
_CONTACTADDRESS_ contents of the 'report_contact' setting
_HEADER(NAME)_ includes the value of a message header. value is the same
as is found for header rules (see elsewhere in this doc)
_TIMING_ timing breakdown report
_ADDEDHEADERHAM_ resulting header fields as requested by add_header for spam
_ADDEDHEADERSPAM_ resulting header fields as requested by add_header for ham
_ADDEDHEADER_ same as ADDEDHEADERHAM for ham or ADDEDHEADERSPAM for spamIf a tag reference uses the name of a tag which is not in this list or defined by a loaded plugin, the reference will be left intact and not replaced by any value. All template tag names should be restricted to the character set [A-Za-z0-9(,)].
Additional, plugin specific, template tags can be found in the documentation for the following plugins:
L<Mail::SpamAssassin::Plugin::ASN>
L<Mail::SpamAssassin::Plugin::AWL>
L<Mail::SpamAssassin::Plugin::TxRep>The HAMMYTOKENS and SPAMMYTOKENS tags have an optional second argument which specifies a format. See the HAMMYTOKENS/SPAMMYTOKENS TAG FORMAT section, below, for details.
The HAMMYTOKENS and SPAMMYTOKENS tags have an optional second argument which specifies a format: _SPAMMYTOKENS(N,FMT)_, _HAMMYTOKENS(N,FMT)_ The following formats are available:
Only the tokens themselves are listed. For example, preference file entry:
add_header all Spammy _SPAMMYTOKENS(2,short)_
Results in message header:
X-Spam-Spammy: remove.php, UD:jpg
Indicating that the top two spammy tokens found are remove.php and UD:jpg. (The token itself follows the last colon, the text before the colon indicates something about the token. UD means the token looks like it might be part of a domain name.)
The token probability, an abbreviated declassification distance (see example), and the token are listed. For example, preference file entry:
add_header all Spammy _SPAMMYTOKENS(2,compact)_
Results in message header:
0.989-6--remove.php, 0.988-+--UD:jpg
Indicating that the probabilities of the top two tokens are 0.989 and 0.988, respectively. The first token has a declassification distance of 6, meaning that if the token had appeared in at least 6 more ham messages it would not be considered spammy. The + for the second token indicates a declassification distance greater than 9.
Probability, declassification distance, number of times seen in a ham message, number of times seen in a spam message, age and the token are listed.
For example, preference file entry:
add_header all Spammy _SPAMMYTOKENS(2,long)_
Results in message header:
X-Spam-Spammy: 0.989-6--0h-4s--4d--remove.php, 0.988-33--2h-25s--1d--UD:jpg
In addition to the information provided by the compact option, the long option shows that the first token appeared in zero ham messages and four spam messages, and that it was last seen four days ago. The second token appeared in two ham messages, 25 spam messages and was last seen one day ago. (Unlike the compact option, the long option shows declassification distances that are greater than 9.)
A line starting with the text lang xx will only be interpreted if the user is in that locale, allowing test descriptions and templates to be set for that language.
The locales string should specify either both the language and country, e.g. lang pt_BR, or just the language, e.g. lang de.
Mail::SpamAssassin(3) spamassassin(1) spamd(1)